Canon AM1 Скачать руководство пользователя

Страница: 45 / 59

Margin Adjustment (Second side)

1. Make 2-sided copies using the Cassette 3 and check that the left edge margin is 2.5 +/- 2.0 mm.

Feeding direction
of paper

image

2. As for nonstandard, change the left edge margin adjustment value for the second side of the 2-sided copy from the

Cassette 3.

Service Mode (level1) > COPIER > ADJUST > FEED-ADJ > ADJ-C3RE and set 1 value larger, the left edge margin becomes
0.1mm larger.

3. Enter the value set to the left edge margin adjustment value for the second side of the 2-sided copy from the Cassette

3 as the side registration adjustment value for the second side of the 2-sided copy from the Cassette 4.

Service Mode (level1) > COPIER > ADJUST > FEED-ADJ > ADJ-C4RE

4. Make 2-sided copies using the Cassette 4, and check that the left edge margin is 2.5 +/- 2.0 mm.

5. As for nonstandard, change the left edge margin adjustment value for the second side of the 2-sided copy from the

Cassette 4.

As making the following selection: Service Mode (level1) > COPIER > ADJUST > FEED-ADJ > ADJ-C4RE and set 1 value
larger, the left edge margin becomes 0.1mm larger.

6. Enter the new adjustment value on the Service Label.

• ADJ-C3RE
• ADJ-C4RE

7. Get out from the service mode.

Adjustment

Содержание AM1




























































Результаты поиска

Содержание AM1

Отзывы:

Похожие инструкции для AM1

Бренды по названию

Популярные бренды

Canon AM1, Руководство по обслуживанию

Результаты поиска

Содержание AM1

Отзывы:

Похожие инструкции для AM1

Бренды по названию

Популярные бренды