Basic Serial Functional Specification for LV-5210/7215/7210
6.4 Operation Requirements
When the projector’s status in this below, functional execution commands are limited.
Projector Status
Available Functional Execution Commands
Standby Mode
C00:POWER ON Only
Processing Countdown
C00:POWER ON
→
Terminate processing Countdown
C01:POWER OFF
C02:POWER OFF
→
Terminate processing Countdown
Processing Cooling Down
NONE(does not execute even if receiving a command)
Abnormal Temperature Status
NONE(does not execute even if receiving a command)
Processing Mode Change
NONE(does not execute even if receiving a command)
Processing Power Save
・
Cooling
Down
NONE(does not execute even if receiving a command)
Processing Power Save
C00:POWER ON
C01:POWER OFF
Other Commands: POWER ON
Note) When the status is above, even if the projector receives other command in the above
status, the projector returns [ACK] [CR].
6.5 POWER ON COMMAND
COMMAND “C00” [CR]
Detail
Note) When the status is above, even if the projector receives other command
in the above status, the projector returns [ACK] [CR].
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
6.6 POWER OFF COMMAND (QUICK Power OFF)
COMMAND “C01” [CR]
Detail
Power OFF(Stand By)
When Power OFF with ON-OFF button of the projector or the remote
control, “Power OFF” will be displayed. However, as soon as this command
is sent, Quick Power OFF is executed.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
6.7 POWER OFF COMMAND
COMMAND “C02” [CR]
Detail
Power OFF(Stand By)
When Power OFF with ON-OFF button of the projector or the remote
control, “Power OFF” will be displayed. However, as soon as this command
is sent, Power OFF is executed.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
Page
9