Canon 600EXII-RT, Инструкция по эксплуатации

Страница: 41 / 148

41
q : Manual Flash
N
When using an EOS-1D series camera, the flash exposure level can be
manually set before shooting. This is effective when you are close to the
subject. Use a 18% gray reflector (commercially available) and shoot as
follows.
1
Configure the camera and Speedlite settings.
Set the camera’s shooting mode to <
q
> or <
f
>.
Set the Speedlite’s flash mode to <
q
>.
2
Focus on the subject.
Focus manually.
3
Set up an 18% gray reflector.
Place the gray reflector at the subject’s position.
Aim the camera so that the entire spot metering circle within the
viewfinder center is over the gray reflector.
4
Press the <
B
>, < P >, or < 7 > button
(
8
)
.
X
The Speedlite will fire a preflash and the required flash output for
the correct flash exposure is retained in memory.
X
On the right side of the viewfinder, the exposure level indicator
will show the flash exposure level against the standard exposure.
5
Set the flash exposure level.
Adjust the Speedlite’s manual flash output and the
aperture so that the flash exposure level aligns with
the standard exposure index.
6
Take the picture.
Remove the gray reflector and take the picture.
Metered Manual Flash Exposure
Metered manual flash exposure is available only with EOS-1D series
cameras.