19
You can set the flash output from 1/64 power to 1/1 full power in full-
stop increments.
Use a hand-held flash meter to determine the required flash output to
obtain a correct flash exposure.
Be sure to first set the camera’s
shooting mode to <
W
> or <
q
>.
1
Press the <
D
> button so
that <
q
> is displayed.
2
Set the flash output.
Press the <
8
> button.
X
The flash output display will blink.
Press the <
9
> button to set the
flash output, then press the <
8
>
button.
Press the shutter button halfway to
see the effective flash range
displayed.
q
Manual Flash
A52_E.book Page 19 Friday, June 10, 2005 4:40 PM
