background image

86

Setting the Image Quality

Selecting an Image Quality

[Image mode]

You can select an image mode suitable for 
the projecting image.
You can select it also with the 

IMAGE

 but-

ton on the remote control. (

P63

)

Press the 

OK

 button to accept your setting 

and then press the 

MENU

 button.

• [Standard] is the factory default.
• You can decide the image quality by 

adjusting the following items in each 
image mode:
[Brightness], [Contrast], [Sharpness],
[Gamma], [Color adjustment], 
[Advanced adjustment] and 
[Lamp mode].

• The adjustment you have made is 

stored as each combination of input sig-
nals and an image mode.

HDMI

COMPONENT

DIGITAL PC

VIDEO

ANALOG PC

Image mode

Image adjustment

Standard

Select this to project an image 
with near-original quality and a 
high regard for reproduction of 
white. It is suited to showing a 
computer screen or watching 
visual software (moving pictures) 
in a bright room.

Presentation

Select this to project an image 
with quality suited for the presen-
tation. It is also suited to project 
visual software (moving pictures) 
with a high regard for the bright-
ness.

Movie

Select this to project moving pic-
tures of all kinds. Its brightness is 
suited to easily enjoy the atmo-
sphere of a movie theatre in a 
dim room.

sRGB

Select this if you want to project 
an image in the display mode 
conforming to the sRGB standard 
(

P132

). It is suited to project an 

image shot by sRGB-compatible 
digital camera.

Photo

If you select [Photo] for [Image 
mode], make sure to set [Ambi-
ent light] in the [Image adjust-
ment] as well. 
You can correct an image 
according to the ambient light 
based on [sRGB] in [Image 
mode] and project the image with 
higher tone on the screen by set-
ting [Ambient light]. 
It is suited to project an ornamen-
tal photo, etc. under an ambient 
light.
It is available if the input signal is 
[ANALOG PC-1], [ANALOG PC-
2], or [DIGITAL PC].

Содержание 4231B005



















































































































































Отзывы: