210
3
Custom Function Settings
C.Fn I -7 Spot metering link to AF point
0: Disable (use center AF point)
1: Enable (use active AF point)
If [
8
C.Fn III -10: Selectable AF point
] (p.223) is set to [
1: 19 points
],
[
2: 11points
], [
3: Inner 9 points
] or [
4: Outer 9 points
], spot metering
linked to the selected AF point is possible. With automatic AF point
selection, spot metering will be at the viewfinder center.
C.Fn I -8 Safety shift
0: Disable
1: Enable (Tv/Av)
This works in the shutter-priority AE (
s
) and aperture-priority AE (
f
)
modes. When the subject’s brightness changes erratically and the
correct autoexposure cannot be obtained, the camera will change the
exposure setting automatically to obtain a correct exposure.
2: Enable (ISO speed)
This works in the Program AE (
d
), shutter-priority AE (
s
), and
aperture-priority AE (
f
) modes. When the subject’s brightness
changes erratically and the correct autoexposure cannot be obtained,
the camera will change the ISO speed automatically to obtain a correct
exposure.
C.Fn I -9 Select usable shooting modes
Disable:
All the shooting modes (
a
,
s
,
f
,
d
,
BULB
) will be
selectable.
Enable:
Only the shooting modes set with [
Register
] will be selectable.
Register:
To make a shooting mode unselectable, uncheck the checkmark
<
X
>. After entering the settings, select [
Apply
].
If C.Fn III -10 is set to [
0: 45 points
], spot metering at the center will be set
even if C.Fn I -7 is set to [
1: Enable (use active AF point)
].
Even if the exposure settings settable range has been changed with
C.Fn I -3,12,13, the safety shift will override it when necessary to obtain
the correct exposure.
With settings 1 and 2, safety shift also works with flash.
COP
Y
