Canon 3670C005, Инструкция по эксплуатации

Страница: 43 / 127

43
Adju s ting the Focu s
Focus Preset
When manual focus is activated, you can register a certain focus point and then, after you focus manually
somewhere else, have the camcorder return to the preset focus position.
1 Activate the manual focus using the FUNC menu and
adjust the focus to the desired position (
A
42).
• The current approximate focusing distance will appear
inside the focus frame and in the focus preset button.
2 Select the focus preset button to save the current focus
position.
• The indicator inside the button will turn orange to show
the focus preset function was activated.
• Select the focus preset button again to cancel the stored
preset focus position.
3 Adjust the focus as necessary using touch focus or the
focus/zoom ring.
• Only the distance displayed inside the focus frame will
change as you focus.
4 Select [ ] to return to the preset focus position.
• [ ] will be grayed out while adjusting the focus or zoom.
• Select the focus preset button to turn off focus preset.
NOTES NOTES
• The preset focus position will be canceled when the camcorder is turned off.
• You can use the
>
[
v
Camera Setup]
>
[Focus Preset Speed] setting to set the speed at which the
camcorder returns to the preset focus position.
• Focusing distances are approximate. You can change the distance units used with the
>
[
£
Display
Setup]
>
[Distance Units] setting.
Using the Focus Assistance Functions
In order to focus more accurately, you can use the following focus assistance functions: Dual Pixel Focus Guide,
an onscreen guide that shows you if the subject is in focus; peaking, which creates a clearer contrast by
emphasizing the outlines of the subject; and magnification, which enlarges the image on the screen. You can use
peaking and the focus guide or peaking and magnification simultaneously for greater effect.
Operating modes:
Operating modes:
Focus preset button
(in orange: focus
preset activated)
Preset focus position
Current focusing
distance
Touch to return to the
preset focus position