Canon 3670C005, Инструкция по эксплуатации

Страница: 42 / 127

Adju s ting the Focu s
42
Adjusting the Focus
The camcorder offers the following ways to focus.
Manual focus: Turn the focus/zoom ring to adjust the focus manually. You can use the focus assistance functions
(
A
43) to help you focus more accurately when using the manual focus.
AF-Boosted MF: Focus manually most of the way and let the camcorder finish focusing automatically.
Continuous AF: The camcorder keeps focusing automatically at all times.
Manual Focus
Use the focus/zoom ring to focus manually. You can focus manually even after touching the screen to adjust the
focus automatically. You can use the
>
[
v
Camera Setup]
>
[Focus Ring Direction] and [Focus Ring
Response] settings to change the direction and responsiveness of the focus/zoom ring when it is used to adjust
the focus.
* Manual focus available momentarily only while operating the focus/zoom ring.
1 S et the focu s /zoom ring s witch to FOCU S .
To focu s u s ing only the focu s /zoom ring
2 Pre ss the AF/MF button.
•
D
will appear on the left of the screen.
3 Turn the focu s /zoom ring to adju s t the focu s .
• The approximate focusing distance will appear on the left of the
screen while you operate the focus/zoom ring.
To focu s by touching a s ubject on the s creen (Touch focu s )
2 Open the focu s s creen.
[FUNC]
>
[
<
Focus]
3 Touch the de s ired point in s ide the focu s frame.
• The
I
mark will flash on the selected subject. The camcorder will focus automatically and then enter
manual focus mode.
• The approximate focusing distance will appear at the top left corner of the focus frame.
• To return the camcorder to autofocus mode, select [
m
].
4 S elect [
X
] to clo s e the focu s adju s tment s creen.
5 If nece ss ary, turn the focu s /zoom ring to further adju s t the focu s manually.
• The approximate focusing distance will appear on the left of the screen while you operate the focus/zoom
ring.
NOTES NOTES
• If you operate the zoom after focusing, the focus on the subject may be lost.
• If you focus manually and then leave the camcorder with the power turned on, the focus on the subject may
be lost after a while. This possible slight shift in focus is a result of the internal temperature rising. Check the
focus before resuming shooting.
Operating modes:
*
Focus/zoom ring