Canon 3670C005, Инструкция по эксплуатации

Страница: 117 / 127

117
Maintenance/Other s
Maintenance/Others
Cleaning
Camcorder body
• Use a soft, dry cloth to clean the camcorder body. Never use chemically treated cloths or volatile solvents
such as paint thinner.
Len s
• Remove any dust or dirt particles using a non-aerosol type blower.
• Use a clean, soft lens-cleaning cloth to gently wipe the lens. Never use tissue paper.
LCD s creen
• Clean the LCD screen using a clean, soft lens-cleaning cloth and commercially available fluid for eyeglasses.
• Condensation may form on the surface of the screen when the temperature changes suddenly. Wipe it with a
soft dry cloth.
Condensation
Moving the camcorder rapidly between hot and cold temperatures may cause condensation (water droplets) to
form on its internal surfaces. Stop using the camcorder if condensation is detected. Continued use may damage
the camcorder.
Conden s ation may form in the following ca s e s :
• When the camcorder is moved quickly from cold to warm places
• When the camcorder is left in a humid room
• When a cold room is heated rapidly
To avoid conden s ation
• Do not expose the camcorder to sudden or extreme changes in temperature.
• Remove the SD cards and battery pack. Then, place the camcorder in an airtight plastic bag and let it adjust
gradually to temperature changes before removing it from the bag.
When conden s ation i s detected
The precise time required for water droplets to evaporate will vary depending on the location and weather
conditions. As a general rule, wait for 2 hours before resuming use of the camcorder.
Using the Camcorder Abroad
Power S ource s
You can use the compact power adapter to operate the camcorder and the battery charger to charge battery
packs in any country/region with power supply between 100 and 240 V AC, 50/60 Hz. Consult a Canon Service
Center for information on plug adapters for overseas use.