Canon 3300 Series Скачать руководство пользователя страница 130

Страница: 130 / 235

Storing Various Dialing Functions

5-16

Setting and Stor

ing Custom F

ax Settings

IMPORTANT

•

Pauses and Spaces cannot be entered before telephone numbers.

NOTE
•

If you insert a pause at the end of a telephone number, the pause interval is fixed at 10
seconds.

•

The telephone number can have up to 20 digits.

•

To erase a telephone number already set, press

(Clear).

•

Press “Cancel” if you want to cancel storing.

Enter the name of the destination, and press “Next.”

For instructions explaining how to enter characters, see the

Reference Guide

You can enter up to 24 alphanumeric characters for a destination name.

NOTE
•

You can erase characters (numbers) by pressing

(Clear).

•

This name is used for the sender information and in the log to identify the destination.

Enter the name of the One-touch Speed Dialing key, and press “OK.”

For instructions explaining how to enter characters, see the

Reference Guide

You can enter up to 12 alphanumeric characters for a One-touch Speed Dialing key name.

Index.book Page 16 Thursday, May 24, 2001 12:30 AM

Содержание 3300 Series












































































































































































































































Результаты поиска

Содержание 3300 Series

Отзывы:

Canon 3300 Series, Руководство пользователя, Страница: 130 / 235

Результаты поиска

Содержание 3300 Series

Отзывы: