Canon 14EX - MR - Ring-type Flash, Инструкция по эксплуатации

Страница: 12 / 136

10
Use four size-AA/LR6 batteries.
1
Open the cover.
Slide the battery compartment cover
as shown by the arrow, then flip up
the edge.
2
Insert the batteries.
Make sure the + and - battery
contacts are properly oriented as
shown in the compartment.
3
Close the cover.
Push down the cover and slide it
back.
Recycling Time and Flash Count
Based on a new set of batteries and Canon’s testing standards.
The figures are the same for both flash tubes/heads firing or single tube/head
firing.
This applies to both the MR-14EX and MT-24EX.
Installing the Batteries
Battery Type Recycling Time Flash Count
Size-AA/LR6 alkaline batteries Approx. 0.1 - 7 sec. Approx. 120 - 800
Use a new set of four batteries of the same brand. When replacing the
batteries, replace all four at one time.
Using size-AA batteries other than the alkaline type (LR6) may cause
improper battery contact due to the irregular shape of the battery
contacts.
Size-AA Ni-MH (HR6) or lithium (FR6) batteries can also be used.
MR14_MT24_01.fm Page 10 Saturday, January 23, 2010 10:44 AM
COP
Y