manualshive.com logo in svg

Canon 0910C005, Руководство пользователя

Поделиться
Скачать
Canon 0910C005 Скачать руководство пользователя страница 48

48

Supervising and controlling by computer

With a proper LAN cable connection and LAN Control settings, you can operate the projector from a 

computer using a web browser or PJLink™ application when the computer and the projector are 

connected to the same local area network.

This projector supports Crestron

®

 software and PJLink

™

.

An example of connecting the projector to computer.

•

When using an external hub or router, use a Category 5 straight cable. (A crossed cable can be 
used with some hubs and routers. See the appropriate documentation for more information.)

•

Don't touch the metal parts of the LAN connector and LAN cable because static electricity may 
be discharged from your body, causing damage to the projector.

Configuring the LAN Settings

If you are in a DHCP environment:

1.

Make sure the projector and your computer are properly connected to the same local area network.

2.

Press 

MENU

 and then press  /  until the 

SYSTEM SETUP: Advanced

 menu is highlighted.

3.

Press   to highlight 

LAN Settings

 and press 

OK/IMAGE

. The 

LAN Settings

 page is displayed.

4.

Press   to highlight 

DHCP

 and press  /  to select 

On

.

5.

Press   to highlight 

Apply

 and press 

OK/IMAGE

.

6.

Please wait for around 15 - 20 seconds, and then re-enter the 

LAN Settings

 page.

7.

The 

Projector IP Address

, 

Subnet Mask

, 

Default Gateway

, and 

DNS Server

 settings will be 

displayed. Note down the IP address displayed in the 

Projector IP Address

 row.

•

If the Projector IP Address still does not appear, contact your network administrator.

•

If the LAN cables are not properly connected, the Projector IP Address, Subnet Mask, Default 
Gateway, and DNS Server settings will display 0.0.0.0. Make sure the LAN cables are properly 
connected and perform the above procedures again.

If you are in a non-DHCP environment:

1.

Repeat steps 1-3 above.

2.

Press   to highlight 

DHCP

 and press  /  to select 

Off

.

3.

Contact your network administrator for information on the 

Projector IP Address

, 

Subnet Mask

, 

Default Gateway

, and 

DNS Server

 settings.

4.

Press   to select the item you want to modify and press 

OK/IMAGE

.

5.

Press  /  to move the cursor and then press  /  to enter the value.

6.

To save the setting, press 

OK/IMAGE

. If you do not want to save the setting, press 

MENU

.

7.

Press   to highlight 

Apply

 and press 

OK/IMAGE

.

If the LAN cables are not properly connected, the Projector IP Address, Subnet Mask, Default 

Gateway, and DNS Server settings will display 0.0.0.0. Make sure the LAN cables are properly 

connected and perform the above procedures again.

External hub

LAN cable (option)

(100BASE-TX or 10BASE-T should be supported.)

Computer

Содержание 0910C005

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды