Canoga Perkins EdgeAccess 9135 SNMP Скачать руководство пользователя страница 51

EdgeAccess Universal Chassis System

Model 9135 10/100/1000

A-1

Appendix A
Warranty

Limited Lifetime Warranty

Effective July 1, 2005 and After

,

 

Canoga Perkins warrants that, at the time of sale, and, for its lifetime, with

certain exceptions noted below, every Canoga Perkins' labeled product purchased will be free from defects in
material and workmanship for its lifetime, if properly installed and used in conformity to Canoga Perkins'
published specifications.  This warranty covers the original user only and is not transferable.  For the purposes
of this Warranty, "lifetime" is defined as the serviceable life of the product (a minimum of 5 years) or any
longer period during which replacement spare parts are available.  Subject to the conditions and limitations set
forth below, Canoga Perkins will, at its option, either repair or replace any part of its product(s) that prove
defective by reason of improper workmanship or materials. The warranty period for power supplies, fans and
optics is five (5) years.  Consumables such as filters are covered for one year. Software is warranted for 90
days. Hardened Media Converter (HS) products are covered for three (3) years.

This warranty does not cover any damage to products that have been subjected to lightning or other Acts of
Nature, misuse, neglect, accident, damage, improper installation, or maintenance, including over-voltage
failures caused by use outside of the product's specified rating, normal wear and tear of mechanical components,
or alteration or repair by anyone other than Canoga Perkins or its authorized representative. If the user is unsure
about the proper means of installing or using the equipment, contact Canoga Perkins' free technical support
services. Customer must notify Canoga Perkins promptly in writing of any claim based on warranty. Canoga
Perkins is not liable for, and does not cover under warranty, any costs associated with servicing and/or the
installation of its products or for any inspection, packing or labor costs in connection with return of goods. In
the event Canoga Perkins breaches its obligation of warranty, customer's sole and exclusive remedy is limited to
replacement, repair, or credit of the purchase price, at Canoga Perkins' option.  Under no circumstance will
Canoga Perkins be liable for consequential or incidental damages or loss of profits.

Warranty Registration

To establish original ownership and to record purchase date, please complete the warranty on-line form on our
product registration page. URL: 

www.canoga.com/warranty

Optional Service Programs

Canoga Perkins offers several optional Service Programs.  Please call Canoga Perkins Sales Department (818-
718-6300) or see our web site (www.canoga.com) for details.

CUSTOMER SERVICE DEPARTMENT REPAIR WARRANTY

Repairs performed by the Canoga Perkins Customer Service Department will be free from defects in material
and workmanship for a period of ninety (90) DAYS from the date the repaired product is shipped, or until the
expiration of the original factory warranty, whichever is longer.

Содержание EdgeAccess 9135 SNMP























































Отзывы: