Cannondale Topstone Neo 5, Быстрый старт

Страница: 11 / 16

Some final pre-ride checks.
Twist Check. Secure the front wheel between your legs and turn the
handlebar. If the handlebar and wheel move independently, the stem
bolts are not tight enough. Use the torque wrench and correct bit to
properly torque the bolts.
Attempt to rotate the handlebar forward and backward in the stem. If
it moves, the stem faceplate bolts are not tight enough. Use the torque
wrench and correct bit to torque the faceplate bolts to specification,
using the same “X” pattern as before.
Grab the front and rear of the seat and attempt to tilt it on the seat
post head. It should not move.
Reflectors. Ensure the front reflector points straight ahead,
perpendicular to the ground. The rear reflector must point straight
back. Tighten both reflectors with a screwdriver.
Gently pull the wheel reflectors toward the rim to ensure they are
braced by the spokes.
H.
I.
J.
K.
L.
H
K
SET-UP STEP 2 STEP 1 STEP 3 PRE-RIDE CHECK
L
I