8
134920 Rev 1.
4 N·m
2 N·m
1
a
2
3
CK3027U00OS
CK3087U00OS
2
2
1
2 N·m
CK3057U00OS
1
2
a
2
NGLI-2
ENGLISH
SUPERSLICE - OWNERS MANUAL SUPPLEMENT
To replace:
Remove the rear axle.
Remove the mounting screws and remove the old
hanger from the dropout. Clean the area around the
dropout and inspect the frame carefully for any cracks or
damage. If you find damage have the frame inspected
by your Cannondale Dealer .
If the dropout is un-damaged, apply a light film of
bike grease to both sides of the dropout. This will help
minimize any noise or “creaking” that might result from
very slight movement between the dropout and hanger
during movement of the derailleur.
Slide the new hanger onto the dropout. Apply Loctite
to the screw threads and tighten to the specified torque.
Rear Derailleur Mount
Front Derailleur Mount
1. RD Hanger
2. Screw
a. Frame cable/wire exit
1. FD Hanger
2. Screw
3. FD Cable Stop
a. Frame cable/wire
exit
Serial Number
The serial number located on the bottom bracket. It
is a 7-character barcode (1). Use this serial number to
registration your bike. See your Cannondale Bicycle
Owner’s Manual for more information on warranty
registration.
www.cannondale.com/registerbike/
