14
15
129975.PDF
Manual reset
nOtICe:
Do not disaasemble or open for the following
procedure.
Perform every 50 hours.
1. With your bike on the floor.
2. Cover the brake rotor with a clean shop towel.
Remove the Schrader valve cap and hold the
valve to release all air pressure. It is normal for
a small amount of oil to be expelled with the
escaping air.
WarnInG
Contamination can result in reduced or
lost braking performance.
3. Hold the valve open while fully compressing
the SUPERMAX with the the handlebar until it
bottoms out. With the air out, using moderate
force, bottom out the SUPERMAX firmly
several times.
4. Now, measure length of exposed inner
tube as shown. Repeat step three until the
correct measurement for your SUPERMAX is
reached.
5.
When you are finished, reset sag.
Measure Fully Compressed
35 +/- 3mm
