9
127399.PDF
Loctite 243
34.0 Nm, (25.0 Ft Lbs)
15mm
1.
2.
3.
4.
Loctite 243
34.0 Nm, (25.0 Ft Lbs)
FORK INSTALL
1. First, bearings should be installed and
Loctite 609 permitted to cure according to
instructions.
2. Make sure the internal cable guide (4)
is threaded 15mm from the top of the
headtube insert and that tubing sections are
installed through it to the BB cable guide
correctly.
3. Slide the fork onto the frame
4. Apply Loctite 243 to the threads and install
the lower bolt (3) and finger tighten it until
the bolt shoulder touches the inner race of
the lower fork bearing.
5. Install 1 to 3 washers (2) between the frame
and the stem / upper bearing to take up the
space.
6. Apply Loctite 243 to the threads and install
the upper bolt (1) and finger tighten it until
the bolt shoulder touches the inner race of
the upper fork bearing.
7. Tighten both upper and lower bolts uniformly
with a torque wrench to 34.0 Nm, (25
ft,Lbs).
Loctite 243:
http://tds.loctite.com/tds5/docs/243%20NEW-EN.PDF
Procedure:
1.
Upper Bolt
2.
Washer
3.
Lower Bolt
4.
Internal Cable Guide
Use a 14mm hex to
tighten the bolts.
Tubing installed (COLOR):
RED - Drive Side / Rear Brake
BLUE - Middle / Rear Derailleur
BLACK - Non-Drive Side / Front Derailleur
