Cannondale Mountain Hardtail Thru Axle, Быстрый старт, Страница: 7 / 16

SET-UP STEP 2 STEP 1 STEP 3 STEP 4 PRE-RIDE CHECK
Step 2. Install the front wheel.
Identify the disc brake rotor side of the front wheel. Orient the wheel
so the disc brake rotor is on the left side – the same side as the front
brake caliper on the fork.
Gently lift the front of the bike and roll the front wheel back into the
fork dropouts, taking care to guide the disc brake rotor into the brake
caliper.
Insert the thru-axle from the right/drivetrain side of the fork.
Use a 6mm hex wrench to firmly tighten the thru-axle. When properly
tightened, the wrench should leave a mark on your hand.
Remove any remaining packaging from the bike.
E.
F.
G.
H.
I.
E
F
G
H