Cannondale Moto, Дополнение к руководству пользователя

Страница: 12 / 20

1
Lower Bonded Cup
KP081/
only
Crown Race
Upper Bonded Cup
Bearing
8H x 52 x Ø40 x 45° x 45°
Compression Ring
Top Cap
One.Point.Five
compatible
Bearing
8H x 52 x Ø40 x 45° x 45°
MOTO CARBON
MOTO ALLOY
KP002/ KP002/
MOTO CARBON frames feature permanently bonded headset bearing cups (above left). the
cups accept only the Cannondale headset bearing in the kit shown above. the headset kit is
compatible with 1.5” steerers.
MOTO ALLOY
frames are compatible the one.Point.Five standard and one.Point.Five to 1 1/8”
conversion headsets.
CAUTIONS
1. Do not face, surface, or cut the head tube or bearing cups for any reason.
2. Please note that when removing bearings from bonded cups, extra care must be used so
that the tool used to drive out the bearing is not located on any part of the bonded cup.
HEAD TUBE