manualshive.com logo in svg

Cannondale Kinneto E-Series, Руководство пользователя, Страница: 36 / 42

Поделиться
Скачать
Cannondale Kinneto E-Series Скачать руководство пользователя страница 36

35

UM-70H0A-001-00

User’s manual

E6000 Series

English

30

 

„

Error messages on the cycle computer

WARNING

This disappears if the error is fixed.
A message appears instead of the clock indication.

List of warnings

Code

Situation where the 

error occurred

Condition for removing 

the operational 

restriction when a 

warning is being 

displayed

Remedy

W010

The temperature of 
the drive unit is high.

The level of assistance 
may decrease.

Stop using the assist function until the temperature of 
the drive unit drops.  
If the situation does not improve, contact the place of 
purchase.

W011

The traveling speed 
cannot be detected.

The maximum speed up 
to which power 
assistance is provided 
may decrease. (Power 
assistance is provided 
up to 25 km/h in top 
gear.)

Check that the speed sensor is properly installed.  
If the situation does not improve, contact the place of 
purchase.

W030

Two or more assist 
switches are 
connected to the 
system.

Gear shifting is not 
available for power 
gear shifting 
derailleurs.

Change the assist switch to the gear shifting switch, or 
connect only one assist switch and turn on the power 
again.  
If the situation does not improve, contact the place of 
purchase.

-

A communication 
error between the 
drive unit and the 
motor unit was 
detected.

Gear shifting is not 
available for power 
gear shifting 
derailleurs.

Check that the cable is properly connected between the 
drive unit and the motor unit.  
If the situation does not improve, contact the place of 
purchase.

Содержание Kinneto E-Series











































Отзывы:

Нет отзывов