Cannondale Full-Suspension EBike, Быстрый старт

Страница: 10 / 16

Some final pre-ride checks.
A
C
To remove the battery cover packaging, support the battery cover,
then turn the battery cover latch counterclockwise. Pull back the
packaging on the battery cover.
Once the packaging is removed, reinstall the battery cover by turning
the latch clockwise
Torque Bolts. Select the correct bit for the stem bolts and install it
into the torque wrench.
Look for the torque specification markings on the front and back
of the stem, as well as the seatpost. If these markings are absent,
torque all stem, seatpost and seat collar bolts to 7 Nm.
Tighten the stem bolts in an ‘X’ pattern and ensure the gap is even
between the stem and faceplate at all four bolts.
A.
B.
C.
D.
E.
D
E
SET-UP STEP 2 STEP 1 STEP 3 PRE-RIDE CHECK