Cannondale C66108M, Дополнение к руководству пользователя

Страница: 11 / 20

9 134903 Rev 3.
ENGLISH
Drive-Assist System
NOTICE
Drive-assist system components must only be
serviced at an authorized service center. This will
ensure the quality and safety of the drive-assist
system.
Never attempt to open, remove drive system parts
from the frame, or work on them yourself. Other
components of the electric bicycle drive (e.g. drive
chain, front chain ring, rear cassette, rear derailleur,
crank arm) must be serviced by an Authorized
Cannondale Dealer.
Replacement parts must be identical to the original
Cannondale specification for the bike. See MODELS
APPENDIX in this supplement. Failure to replace
components with original specification can result in
serious overload or other damage to the drive unit.
Unauthorized opening or service of the drive unit
will void the warranty.
Cleaning
When cleaning your bike, use a damp sponge or a soft
brush with only a mild soap and water solution. Rinse
the sponge often. Do not spray water directly on
controls or drive system components.
NOTICE
Do not use a pressure washer or dry with
compressed air. This will force contaminants into
sealed areas, electrical connections/components
promoting corrosion, immediately damaging, or
result in accelerated wear.
KEEP WATER AWAY FROM THE ELECTRICAL
COMPONENTS.
MAKE SURE THE BIKE IS SECURED UPRIGHT AND
CAN NOT FALL OVER ACCIDENTALLY WHILE YOU
ARE CLEANING IT.
Don’t rely on the kickstand. Use a sturdy portable
bicycle wheel stand to hold the bike upright.
Keys
Please Note: After lots of rides and washing, the battery
lock can become dry and difficult to use.
To maintain, whenever you lubricate your bike chain,
place a few drops of chain oil on the key insert the key
and operate the lock, then remove and wipe the key
clean.