Cannon MAGNUMTM 10, Руководство по установке

Страница: 21 / 64

© 2020
|
Johnson Outdoors Marine Electronics, Inc.
|
cannondownriggers.com
21
TERMINATING THE DOWNRIGGER LINE
p. With the front of the Cannon Terminator still facing
toward you, take the Line and place it along the
track along the right side of the Terminator and
insert it so that it exits the hole at the far end of
the track. The Line will exit the hole towards the
back side of the Terminator.
q. Turn the Terminator over so the back side is facing
toward you. Pull about 6 inches of slack through
the Terminator.
r. Take the end of the Line and put it through the
hole on the back of the Terminator right next to
the hole that the Line was just fed out of. The hole
is in the middle of the Terminator and is directly
between the hole that the Line just exited and
the very first hole that the Line was fed through
on the Terminator.
s. Turn the Terminator over so that the front of it
is facing towards you. The end of the Line that
was just inserted into the back of the Terminator
should run along the track in the middle of the
Terminator. Feed the Line all the way along this
Track so that it exits the hole in the middle of the
Terminator along the middle of the Bottom Hook
at the end of the Track. The Line should stick
out about 1/8 inch from the Terminator along the
Bottom Hook.
7
8
Back Back Back Back
Cannon Cannon
Terminator Terminator
Cannon Cannon
Terminator Terminator
Middle Middle
Track Track
Bottom Bottom
Hook Hook
1/8 inch 1/8 inch
Cannon Cannon
Terminator Terminator
Cannon Cannon
Terminator Terminator
Line Line
Line Line
Line Line
Line Line
Line Line
Line Line
Line Line
Line from Line from
Downrigger Downrigger
Front Front
7p
8s
7r
7r
Front Front