UNPACKING
Unpack the components from inside the grill and oven: Check that the following parts
are present.
Grill pan and grid
Pan supports
Meat tin
Enamelled burner caps (4)
Oven shelves (2)
Aluminium burner bodies (4)
Battery Literature
Pack
LEVELLING
Four skid feet are fitted which can be screwed in or out to level the cooker. Move the
cooker by pushing at both sides on the lower half of the oven door.
CAUTION: Some soft floor coverings may get damaged if the cooker is not moved
carefully.
STABILITY BRACKET
The back of the cooker has a slot which can be used to engage a stability bracket,
which can be obtained, as an extra, from the cooker supplier. The leaflet included with
the bracket should be read in conjunction with the following instructions.
Push cooker to its intended position.
Draw pencil lines on the floor in line with the front and left side of the plinth.
Remove the cooker.
Position stability bracket in accordance with Fig. 5 and secure to the floor.
Measure height from floor level to the bottom of the slot in the back of the
cooker.
Add 3mm to the dimension and assemble the stability bracket to that height.
(i.e. from floor level to the underside of the top member).
21
