Cannon CAV 4.2 Скачать руководство пользователя | Manualshive

Страница: 57 / 64

background image

CANNON Instrument Company® | Maintenance and Service

51

CAV® 4.2 Operation Manual

Maintenance and Service

Update CAV 4.2 Software and Firmware

Software and firmware code updates may occasionally need to be manually installed on the CAV 4.2
user-interface, controller boards, and controlling PCs. There are four types of code that can be installed:

•

UI updater: this software is actually the complete UI updater program (UpdateUI.exe) that runs on
the CAV 4.2. It is used to install the UI software and firmware updates. It is updated by copying it
over the existing UpdateUI.exe.

•

CAV 4.2 GUI software: this software is the CAV 4.2 user-interface. To update the CAV 4.2 GUI
software, you must be logged out of the user-interface and running the UI updater instead.

•

Firmware updates: this code controls the baths, sample handlers, and valve controls. It is installed
directly onto the respective controller boards using the UI updater.

•

VISCPRO II: this software is installed on the controlling PC.

Tools and Materials Required

See Table 28 for tools and materials required to update the software and firmware.

Table 28 — Tools and Materials Required for Software and Firmware Update

Setting

Description

#2 Philips screwdriver

USB flash drive

Software/firmware updates

USB keyboard

USB Type A-Male to Mini B cable (6ft)

Prepare the USB Flash Drive

A USB flash drive must be loaded with the software and firmware to be updated.
1.

On a PC, download the update packages from the CANNON website Software & Downloads page.

2.

Unpack and copy the update files to the USB flash drive. Only one set of files can be on the USB flash
drive during an update.

Replace the UI Updater

1.

From the GUI, click

Help > Upgrade UpdateUI

.

2.

Plug the prepared USB flash drive into the USB connection.

3.

Follow the instructions on the screen.

«
...
55
56
57
58
59
...
»

Содержание CAV 4.2

































































Отзывы:

Нет отзывов

Похожие инструкции для CAV 4.2

BML SL1-ALZ-ZZ Series

Бренд: Balluff Страницы: 26

Бренд: Hach Страницы: 145

Бренд: Hach Страницы: 358

Polymetron 9582sc

Бренд: Hach Страницы: 280

Бренд: HACH LANGE Страницы: 15

Бренд: AR Страницы: 8

GroundCast DRS611

Бренд: Vaisala Страницы: 12

Бренд: Samsara Страницы: 16

Vario 4 Typ 4.5.1

Бренд: techem Страницы: 142

Бренд: Analog Arts Страницы: 8

Heavy Duty 2270-20

Бренд: Milwaukee Страницы: 33

PHYSICS line C.A 832

Бренд: Chauvin Arnoux Страницы: 43

Бренд: Amrutha Technologies Страницы: 22

Бренд: Straightpoint Страницы: 24

Бренд: Samoa Страницы: 4

Бренд: MEWOI Страницы: 21

Бренд: South Страницы: 54

Бренд: Analog Devices Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды