Models: CAST18R, CAST24R, CAST32R
CAUTION
19.
When assembling, keep clear from any board or flammable material.
20.
The unit is for household use only. It is not suitable for use on a building site,
greenhouses, barn or stable, where there’s flammable dust.
21.
The head of the unit is at high temperature during operation. Unplug the unit
and wait till it’s cool before cleaning.
22.
The units (1800W & 2400W) should be plugged in a socket outlet, which is easily
visible and reachable.
23.
DO NOT
store or use any flammable liquids in the vicinity of this unit.
24.
DO NOT
spray aerosols in the vicinity of this appliance whilst appliance is operating.
Most aerosols are flammable, which can be a fire hazard if used neae appliance when
it is in use.
25.
DO NOT
modify this appliance. Any modification may create a hazardous situation and
void your warranty.
26.
DO NOT
allow young children or the infirm to remain unsurpervised or sleep directly
infront of or below the appliance while in operation.
WARNING:
This heater is not equipped with a device to control the room temperature.
Do not use this heater in small rooms when they are occupied by persons
not capable of leaving the room on their own, unless constant supervision
is provided.
IMPORTANT INFORMATION:
Models CAST18R
and
CAST24R
are fitted with an Australian / New Zealand
flexible 1.8M cord and 3 pin plug. A dedicated 240V 50Hz earthed 10AMP
socket outlet must be used with this appliance.
Model CAST32R
are fitted with an Australian flexible 1.8M cord and can be
hardwired, or it can be fitted with a 3 pin, 15amp plug into a 15amp socket
outlet. This MUST only be performed by an authorised person. In accordance
with local regulations.
DO NOT
Coil or bundle the electric cord to reduce its length as overheating
may result which could become a fire hazard.
The electrical cord
MUST NOT
come into contact with the heated parts of this
appliance.
DO NOT
use this appliance as a portable heater. Use of an extension cord on
this appliance is not recommended.
Page 4
