switched to charging end within 50 hours, this is an indication of an error.
Manually disconnect the charger.
♦ Batteries consume water during use and charging. For batteries where water
can be added, the water level should be checked regularly. If the water level is
low, add distilled water.
♦ This appliance is not designed for use by children or people who cannot read or
understand the manual unless they are under the supervision of a responsible
person to ensure that they can use the battery charger safely. Store and use the
battery charger out of the reach of children, and ensure that children cannot play
with the charger.
♦ Connection to the mains supply must be in accordance with the national
regulations for electrical installations.
Connect and disconnect the charger from a battery.
If the battery clamps are incorrectly connected, the reverse polarity protection will
ensure that the battery and charger are not damaged.
For batteries mounted inside a vehicle
1. Connect the red clamp to the battery's positive pole.
2. Connect the black clamp to the vehicle chassis remote from the fuel pipe and
the battery.
3. Connect the charger to the wall socket.
4. Disconnect the charger from the wall socket before disconnecting the battery.
5. Disconnect the black clamp before the red clamp.
Some vehicles may have positively earthed batteries
1. Connect the black clamp to the battery's negative pole.
2. Connect the red clamp to the vehicle chassis remote from the fuel pipe and the
battery.
3. Connect the charger to the wall socket.
4. Disconnect the charger from the wall socket before disconnecting the battery.
5. Disconnect the red clamp before the black clamp.
