5. USE
a.
Drill rod assembly (See fig .1)
– Place the machine body on a flat and stable location.
– Remove the clip and pin on the drill rod.
– Install the rod and align the holes to be able to connect the two sets.
– Put the pin back in place by clipping.
– Release the clipping and remove the pin.
b. Before use
–
Check the condition of the machine, that there is no damage or malfunction. In
case of problems, do not use the machine and inspect it.
–
Check that the drill rod is properly assembled.
–
Check the fuel volume. Always refuel before operating the machine. Never use the
machine with little or no fuel.
–
Check the workspace; remove all obstacles, materials and objects that could pose
danger and cause an accident.
–
Secure the workspace by placing markings to alert spectators of existing potential
risk.
c. Use
– Hold the drill vertically.
Place the rod against the ground.
– Switch on the machine by turning
the switch to ON. (Fig. 2)
– Pull the launcher cable to start the
machine.
– Hold the drill by grasping the
holding handle and main handle
Fig.2
Fig.1
Fig.3
