4
Power ON/OFF
Push power switch 1~2 seconds to switch
ON/OFF
the power.
How to replace Lithium-ion Battery
•
Open the bolt on the bottom cover and take the Li-ion battery out.
•
Place new Li-ion battery.
•
The Li-ion battery is replaceable and rechargeable.
•
The Li-ion battery can last more than 13 hours in continuous operation mode.
Connect to your PC/PDA/SMARTPHONE
A.
Push the power button for 1~2 seconds, power on the Bluetooth GPS receiver
.
B.
Put the Bluetooth GPS receiver
at proper place (open sky) for good GPS signal reception.
C.
Turn on the power of your navigation platform like
PC/PDA/ SmartPhone
etc...
D.
Search for Bluetooth device by your Bluetooth manager on your Host Platform (
PC/PDA/Smartphone
). Normally Pin code is not
necessary. But some Bluetooth embedded system force to enter pin code (password), please fill
0000
in such case.
E.
Connect the Bluetooth GPS Receiver
and then make sure baud rate set at 38400 bps (standard) in your application program.
F.
Load your GPS mapping or routing software, along with the corresponding maps of the areas that you are occupying or plan
to travel. Start the application. Make sure the application is set for the
COM port that your Bluetooth-enabled mobile device
will use for serial communication. N ow you should be ready to use
your GPS application as directed by the user
docum entation that came with the software. More configurations may be necessary.
G.
In firstly use of this Bluetooth GPS Receiver, we strongly recommend you to bring your Bluetooth GPS receiver
outdoor or open sky
at least 15~20 minutes for sure 3D position fixed and almanac updated.
