![background image](http://html2.mh-extra.com/html/cangaroo/supreme/supreme_manual_3907713016.webp)
Volume of the baby bottle
Water in the device (ml)
Heating time (minutes)
90ml
20
3
120ml
20
3
150ml
20
4
180ml
20
4
210ml
20
4
240ml
20
4
270ml
25
5
300ml
25
5
330ml
25
5
Note:
•If there is not enough water in the water tank for the time set during the heating process, the device will beep
intermittently and at the same time the digits representing the remaining time will flash.
•If you wish to temporarily interrupt the working process, press the power button for pause. To restart the
process, press the same button again.
•The device will turn off automatically in five minutes when paused.
CAUTION!
The steam given off during the warming cycle is very hot. Keep your hands off the appliance
during its operation.
IMPORTANT:
Always use the bottle tray (6) for sterilization. The baby bottles must never come into direct
contact with the heating plate as this could cause damage.
6.After the sterilization cycle
• Unplug the power cord.
• Wait for at least 3 minutes before attempting to remove the top cover to allow the sterilizer to cool.
• Wash your hands thoroughly before touching the sterilized items.
• Remove the top cover carefully.
• There may still be hot water and steam in the sterilizer. Using the tongs provided, take out the small
accessories and baby bottles and place them on an hygienic surface.
•Assemble them immediately. Do not rinse the bottles after sterilizing.
•After each use and after allowing the sterilizer’s base to cool, pour away any remaining water from the base unit
and wipe it dry.
Note
: Allow the sterilizer to cool down for at least 20 minutes before sterilizing again.
B. Fast heating up
1. Pour into the bottle warmer heating base (9) the amount of water stated in the tables shown below in this
section according to the volume and temperature of the baby bottle/ food.
2. Place the feeding bottle or baby food jar into the heating basket (8) and place them into the bottle warmer
heating base.
3. Plug the power cord of the device into the mains. A flashing will appear. Press the mode selection button until
the fast heating up symbol displays and flashes. The default heating time is 3 minutes. You can adjust the
heating time with
“+” or “-” button. The adjustable range is from 1 minute to 10 minutes. Press “+” or “-” to
change with 1 minute. Once you set up the heating time, the symbol flashes 5 times and the device starts
working automatically. When the heating cycle has been completed, the device will beep and the display will turn
itself off to notify the user.
4. Taking the relevant precautions to avoid burns. Remove the bottle/ jar and check the temperature of the food
before giving it to your baby.
5. Heating a PP milk bottle with fridge temperature
(≈ 4°C):
Weight of the baby food jar
Water in the device (ml)
Heating time (minutes)
190g
45
7
250g
48
8
15
Содержание SUPREME
