![background image](http://html1.mh-extra.com/html/cangaroo/foxy/foxy_instruction-manual_3906538009.webp)
9
18.
Before each use check whether there are any damaged, broken, chipped or missing parts. Check also the
integrity of the safety belts – whether they are worn or ragged. If you find any such damage, stop using the
bouncer until the damage is repaired, and the parts - replaced.
19.
Do not repair the bouncer by yourself. In case of damage, contact the shop, from which you have bought it,
or the importer.
20.
Do not use accessories or spare parts, different from those approved by the manufacturer.
21.
After unpacking the product, remove all plastic packaging. Through them out at the designated places.
22.Warning!
In order to prevent the risk of suffocation, keep all packages away
23.
Do not fold the bouncer while the child is in it.
24.
Do not move the bouncer and do not adjust the backrest while the child is in the bouncer.
25.
Do not use the toy bar in order to lift and move the bouncer.
26. DO NOT USE,
if any of the parts is missing or is broken.
27. In order to protect the child from serious injury or death -
Never place the bouncer on soft surface (bed,
sofa, pillow). The product may upturn and cause suffocation in the soft surfaces.
28.
Always use the restraint system, while the child already has the skills to climb on or get out of the product
unaided.
29. Warning!
Adult assembly required.
PARTS
WARNING!
Remove all parts from the packaging and check according to the list, illustrated in the instruction
manual, if all are present.
See Figure P, on which are marked the parts of the bouncer:
1.Soft upholstery of the seat; 2.Tube of the backrest; 3.Stands (Feet) for the frames; 4.Cross brace; 5.Retainers
with Lock nut; 6.Side frames; 7.Vibration mechanism; 8.Kickstand; 9.Toy bar
ASSEMBLY
WARNING!
Before assembly and before each use, check the product for broken parts: loose connections,
missing parts or sharp edges
.
After each action, we advise you to check whether the placed parts are fixed well.
1. Step 1 - Installation for the back tube:
• Position each of the side rail so that the buttons (B) are facing outward.
• While pressing the tabs at the ends of the seat back tube, insert it into the sockets (SRL) on the side rails.
Press carefully until the tube is fixed. You will hear a clicking sound on both sides.
2. Step 2 - Installation of the stands for the frames:
Place the feet (F) оn the side rails (SR). The beveled end of the rails should be inserted in the respective
openings for fixing of the feet.
3. Step 3 - Fixing of the feet:
• Fit the peg of the inside of the foot in the hole in the end of the side rail.
Hint:
Each foot is designed to fit the correct side of the rails. If a foot does not seem to feet, try to fix it to the
other side rail.
• Repeat this procedure to assemble the other foot to the other side rail.
4. Step 4 - Installation of the vibration unit:
• Place the unit so that its front part faces towards you.
• Insert the protruding parts of the mechanism in the respective openings of the side rails. Slide a M5 * 38 mm
screw trough the openings on each side. Using a screwdriver tighten the screws in order to fix the vibration unit.
5. Step 5 - Placing of the kickstand:
Slide the ends of the kickstand in the openings of the side rails. After that
slide on each side trough the openings a M5 x 58 mm screw. Using a screwdriver tighten the screws in order to
fix the vibration unit.
6. Step 6 - Installation of the support:
Place the support between both sides of the bouncer’s side rails.
Advice:
The support is constructed so that it is placed correctly in only one way. If while you assemble it and it
cannot fit, turn it around and try again.
7. Step 7:
Slide a M5 X 30 mm screw through the openings on the outside of each side rail and into the ends of
the support (cross brace).
Important!
Please follow step 8 carefully, in order to engage the support for the side
rails.
8. Step 8:
Place a retainer with lock nut to the end of the screw at the inner side of the rail. Tighten the screw
using a screwdriver in order to fix the cross brace.
9. Step 9 - Installation of the soft seat
: Slide the upper pocket of the seat in the rear tube of the backrest.
Содержание FOXY
