background image

Page 2

All settings revert to default when power is removed.

Default settings

1. Call alert tone ON/OFF - ON.

2. Bright or dim green LED’s - bright.

3. Vibration mode ON/OFF (Duplicates Call LED and will respond to a Call signal when the Call LED is

suppressed in ‘dim’ mode) - default is ON.

4. Disable or enable mic 1 (Mic 2) - ENABLED.

Preference Settings

Alert Tone

Switch off mic 1 and 2, hold down “Call” button for 3 seconds - red call LED flashes slowly for 2 secs.

To select alert tone off, while Call LED is flashing, press mic 1 - call alert tone on for 1 sec.
To select alert tone on, while Call LED is flashing, press mic 1 - call alert tone on for 1 sec.

When the call alert mode is programmed ON, 50mS of call alert tone acknowledges that the call switch is
pressed at the start of the 3 sec ‘hold down’.This button press acknowledgement is then suppressed until the
unit deselects set up mode and reverts to normal operation.

LED Brightness

Switch off mic 1 and 2, hold down “Call” button for 3 seconds - red call LED flashes slowly for 2 sec.

To select dim LEDS, while call LED is flashing, press mic 2 - call LEDs on dim for 1 sec.

To select bright LEDS, while call LED is flashing, press mic 2 - call LEDs on bright for 1 sec.

Vibration ON/OFF - BP531, BP543 and BP545 only 

Switch off mic 1 and 2, hold down call for 3 sec - red call LED flashes slowly for 2 sec.

To select vibration off, while call LED is flashing, press mic 1 and mic 2 – unit vibrates for 1 sec.

To select vibration on, while call LED is flashing, press mic 1 and mic 2 - unit vibrates for 1 sec.

Mic Disable

Switch off mic 1 and 2, hold down call for 10 sec - red call LED flash rate changes to quick flash after 10 sec.

To disable Mic 1, while call LED is flashing, press mic 1 - Mic 1 LED flashes once.

To enable Mic 1, while call LED is flashing, press mic 1 - Mic 1 LED flashes 3 times.

To disable Mic 2, while call LED is flashing, press mic 2 - Mic 2 LED flashes once.

To enable Mic 2, while call LED is flashing, press mic 2 - Mic 2 LED flashes 3 times.

PROGRAMMABLE OPTIONS

Отзывы: