Candy GO W 485 D ALISE, Инструкция пользователя

Страница: 13 / 40

C
D
13
EN
PROGRAMME SELECTOR WITH OFF POSITION
WHEN THE PROGRAMME SELECTOR IS TURNED THE DISPLAY
LIGHTS UP TO SHOW THE SETTINGS FOR THE PROGRAMME
SELECTED. TODAY, MOST DETERGENTS HAVE BEEN IMPROVED TO
WASH EFFICIENTLY AT LOWER TEMPERATURES, THEREFORE WE
HAVE SET THE DEFAULT TEMPERATURE SETTINGS OF EACH
PROGRAMME TO A LOWER LEVEL, SAVING ELECTRICITY AND
REDUCING THE CARBON FOOTPRINT OF YOUR MACHINE.
YOU CAN SELECT AN HIGH TEMPERATURE BY PRESSING THE
TEMPERATURE BUTTON. PLEASE REFER TO THE PROGRAMME
GUIDE FOR THE MAXIMUM TEMPERATURE TO WHICH EACH
PROGRAMME CAN BE SET.
N.B. TO SWITCH THE MACHINE OFF, TURN THE PROGRAMME
SELECTOR TO THE “OFF” POSITION.
Press the " Start/Pause " button to start the selected cycle.
The programme carries out with the programme selector
stationary on the selected programme till cycle ends.
Switch off the washing machine by turning the selector to OFF.
NOTE
:
THE PROGRAMME SELECTOR MUST BE RETURN TO THE
OFF POSITION AT THE END OF EACH CYCLE OR WHEN
STARTING A SUBSEQUENT WASH CYCLE PRIOR TO THE
NEXT PROGRAMME BEING SELECTED AND STARTED.
“WASH TEMPERATURE” BUTTON
When a programme is selected the relevant indicator will light
up to show the recommended wash temperature.
The Temperature button can be used to decrease or increase
the temperature of your chosen wash cycle.
Each time the button is pressed, the new temperature level is
shown on the Wash Temperature Indicator.
“SPIN SPEED” BUTTON
The spin cycle is very important to remove as much water as
possible from the laundry without damaging the fabrics. You
can adjust the spin speed of the machine to suit your needs.
By pressing this button, it is possible to reduce the maximum
speed, and if you wish, the spin cycle can be cancelled.
To reactivate the spin cycle is enough to press the button until
you reach the spin speed you would like to set.
For not damage the fabrics, it is not possible to increase the
speed over that automatically suitable during the selection of
the program.
It is possible to modify the spin speed in any moment, also
without to pause the machine.
NOTE:
THE MACHINE IS FITTED WITH A SPECIAL ELECTRONIC DEVICE,
WHICH PREVENTS THE SPIN CYCLE SHOULD THE LOAD BE
UNBALANCED. THIS REDUCES THE NOISE AND VIBRATION IN
THE MACHINE AND SO PROLONGS THE LIFE OF YOUR
MACHINE.
B