Candy EY4 1061DE/1-S, Руководство пользователя

Страница: 70 / 136

70
Simultaneously pressing the START/PAUSE
and OPTIONS buttons allows a previously
downloaded cycle to be started whilst the
Smart Touch position is selected on the
programme knob (for downloading cycles
from the App see the relevant section of this
user manual).

Pressing simultaneously the buttons
TEMPERATURE SELECTION and SPIN
SELECTION for about 3 seconds , the
machine allows you to lock the keys. In
this way, you can avoid making
accidental or unwanted changes if a
button on the display is pressed
accidently during a cycle.

The key lock can be simply cancelled by
pressing the two buttons simultaneously
again or turning off the appliance.
The display’s indicator system allows you to
be constantly informed about the status of
the machine.
1) DOOR LOCKED INDICATOR LIGHT

The indicator light is illuminated when the
door is fully closed.
 When
START/PAUSE
is pressed on the
machine with the door closed, the
indicator will flash momentarily and then
illuminate.
 Wait until the DOOR LOCKED light has
gone out before opening the door.
2) SPIN SPEED
This show the spin speed of the selected
programme that can be changed or omitted
by the relevant button.
3) WASH TEMPERATURE INDICATOR
LIGHTS
This shows the washing temperature of the
selected programme that can be changed
(where allowed) by the relevant button.
If you want carry out a cold wash all the
indicators must be off.
4) CYCLE DURATION

When a programme is selected the
display automatically shows the cycle
duration, which can vary, depending on
the options selected.

Once the programme has started you will
be kept informed constantly of the time
remaining to the end of the wash.

The appliance calculates the time to the
end of the selected programme based
upon a standard loading, during the cycle,
the appliance corrects the time to that
applicable to the size and composition of
the load.
5) STAIN LEVEL INDICATORS LIGHTS
 Once the programme has been selected,
the indicator light will automatically show
the stain level set for that programme.
If the door is not properly closed,
the light will continue to flash for
about 7 seconds, after which the
start command will be automatically
delete. In this case, close the door in
the proper way and press the
START/PAUSE button.
Close the door BEFORE selecting the
START/PAUSE button.
Digital Display
KEY LOCK
START SMART TOUCH
This option must be selected before
pressing the START/PAUSE button.