cycle duration (V)
When a programme is selected the display automatically shows the cycle duration, which can vary, depending
on the options selected.
Once the programme has started you will be kept informed constantly of the time remaining to the end of the
wash.
door light (G)
Once the START/PAUSE button has been pressed the light first flashes then stops flashing and remains on
until the end of the wash.
2 minutes after the end of the wash the light goes off to show that the door can now be opened.
Cancel-change programs
Once you have started a program, and wish to change or cancel it, you should proceed in the following manner,
- Put the program selector in the OFF position. At that instant, you have cancelled the program and can if
you wish to do so, select a new one.
- Select the new program.
- Click the key (H) again.
The washing machine will perform the new selected program.
Programme pause
It is possible to momentarily stop the wash programme so that more washing can be added, and to do so,
proceed as follows:
- Hold down the (H) key until the option key lamps begin to flash and the time remaining indicator display, and
pilot lamp lights up.
- When the Door Lock lamp goes out (after approx. 2 minutes), open the door and add the desired washing.
- Correctly close the doors of the drum and the outer cover.
- Press the key H, and the washing machine will continue with the programme.
When the programme has been completed, the message "END" will appear in the indicator display,
Wait until the Door Lock lamp (G) goes out (after approx. 2 minutes)
“To remove the washing, set the programme selector to the OFF position”, before
opening the washing-machine lid and the drum doors.
15.05.14 / H-46007842 EN