PREPARING THE WASH CYCLE
1.- Once the washing is loaded, ensure that the drum doors are properly closed..
2.- Add detergent and additives, not exceeding the maximum level indicator.
detergent for pre-wash I
detergent for wash programme II
fabric
conditioner
SELECTING THE DESIRED PROGRAMMES AND OPTIONS
3.- Turn the programme selector (A) to the desired programme.
4.- Press the key or keys for any options desired (C1, C2,).
.- It is advisable to select the required options before pressing the Programme Start key (H).
.- Remember that if the programme has already passed the stage at which an option is activated, that option
will not be implemented.
C1 cold wash key
By pressing this button it is possible to transform every programme into a cold washing one, without modify
other characteristics (water level, times, rythmes, etc..).
Curtains, small carpets, man made delicate fabrics, non coulor fast garments can be safely washed thanks to
this new device.
C2 aquaplus (sensitive key)
Thanks to the new SENSOR ACTIVA SYSTEM, by pressing the key it is possible to run a special washing cycle
applicable to all programs and types of fabric, caring for their fibres and the delicate skin of the users who use
them.
Taking on much more water, together with the new combined action of drum rotation cycles and taking on and
discharging water allow you to obtain perfectly clean, rinsed clothes. More water is used in the wash to dissolve
the detergent completely, ensuring an effective washing action. The water in the rinses has also been increased
to eliminate all trace of detergent in the fibres.
This function has been specifically studied for people with delicate, sensitive skin, who can suffer irritation or
allergy from the slightest detergent residue.
It is also advisable to use this function for children's clothes and delicate fabrics in general, especially for
washing bathrobes, whose fibres tend to retain detergent.
This option is not available for the wool program.
5.- Select spin speed if required (B1)
B1 spin speed
Once the programme has been selected, the maximum spin speed allowed for that programme appears on the
display. Pressing the spin button will reduce the speed by 100 rpm each time the button is pressed.The
minimum speed allowed is 400 rpm, or it is possible to omit the spin by pressing the spin button repeatedly.
6
.-
To start the programme, once options have been chosen, press the key H. The washing machine will begin
to operate. If you wish to cancel the option you have selected, press the key again. (The pilot light will go off.)
B2 delay start button
This button allows you to pre-programme the wash cycle to delay the start of the cycle for up to 24 hours.
To delay the start use the following procedure:
Set the required programme.
Press the button once to activate it (h00 appears on the display) and then press it again to set a 1 hour delay
(h01 appears on the display); the pre-set delay increases by 1 hour each time the button is pressed, until h24
appears on the display, at which point pressing the button again will reset the delay start to zero.
Confirm by pressing the “START/PAUSE” button (the light on the display starts to flash). The countdown will
begin and when it has finished the programme will start automatically.
It is possible to cancel the delay start by taking the following action:
Press and hold the button for 5 seconds until the display will show the settings for the programme selected.
At this stage it is possible to start the programme previously selected by pressing the “START/PAUSE” button
or to cancel the process by setting the selector to the OFF position and then selecting another programme.