FLEXIBLE AREA
This area can be used as a single zone or as two different
zones, accordingly to your cooking needs.
Flexible area is made of two independent inductors that can
be controlled separately. When working as a single zone,
the part that is not covered by cookware is automatically
switched off after one minute.
- Anywhere with bigger cookware.
To grant a correct pan detection and a even heat distribution,
the cookware should be correctly placed:
- In the front or rear side of the flexible zone when the
cookware is smaller than 22 cm.
As large zone
To activate the flexible area as a single large zone, simply press
the dedicated keys.
The power setting works as any other cooking zone.
If the pan is moved from the front to the rear part of the zone (or vice versa),
the flexible area automatically detects the new position,
keeping the same power.
As two independent zones
To use the flexible area as two different zones with different
power settings, press the dedicated controls.
6
7
8
Beeij
1800
MehcWb
3000
Heating Zone
The maximum power of cooking zones is
as follows:
R^[ WXel[ cWo lWho
e j^[ i_p[ e\ j^[ fWd WdZ
j^[ cWj[h_Wb _j _i cWZ[ \hec
WYYehZ_d] j
3000
Flexible Area
9
1800
000
3000
Deactivation of the continuum zone
the continuum key again
Resetting the power of the continuum zone or pressing
1800
4000
1800
3
E_decfTeZ`_d W`c NdV
3000
EN-9