PREPARING THE WASH CYCLE
1.- Once the washing is loaded, ensure that the drum doors are properly closed.
2.- Add detergent and additives, not exceeding the maximum level indicator.
• detergent for pre-wash I
• detergent for wash programme II
• bleach
• fabric conditioner
SELECTING THE DESIRED PROGRAMMES AND OPTIONS
3.- Tu r n t h e p r o gra m m e s e l e c t o r ( A ) t o t h e d e s i r e d p r o gra m m e. ( c l o k w i s e ) .
4.- Press the key or keys for any options desired (C1, C2).
C1: easy iron key
This function helps reduce creasing, depending on the programme selected and the type of
fabric washed. This works as follows:
Mixed,Synthetics. Intermediate spins during rinses are eliminated, the final spin is a gentle spin.
Delicates. Intermediate spins during rinses are eliminated and the machine stops before the
final spin, which is a gentle spin.
Hand wash, Woollens and Cotton. The machine stops before the final spin.
Rinses. Intermediate spins during rinses are eliminated, the final spin is a gentle spin.
To complete the wash cycle
in the Delicates , Hand wash , Cotton, and Woollens programmes,
press the Easy Iron key again: the machine will empty and perform the required spin.
To empty machine of water with no spin, cancel the ongoing programme and select the Empty
programme
C2: extra rinse key
The electronic system engaged by this key activates a new special rinse cycle. More water and
a combination of drum rotation movements ensure that washing is perfectly rinsed. The key can
be activated in Cottons, Mixed, Synthetics, Delicates, and Rinses programmes.
5.- Select spin speed if required (B1)
B1 spin selector
Use this control to select the maximum spin speed within the range for the model of washing
machine in question and the programme selected (see programme table). The control can be
turned in both directions.
Spin speed may be selected at any time during the programme.
6.- Select wash temperature if required (B2)
B2 temperature selector
Use this control to select the wash temperature within the range for the programme selected
(see programme table).
The control can be turned in both directions.
Select the required temperature before starting
the programme.
7.- Once you have selected the desired options, press the START key (H). The washing machine
will start up .
To cancel an option after setting, just press the option key again.