EN-11
Pan dimensions
The cooking zones are up to a limit, automatically adapted to the diameter of the
pan. However the bottom of this pan must have a minimum of diameter according
to the corresponding cooking zone. To obtain the best efficiency of your hob,
please place the pan in the centre of the cooking zone.
The base diameter of induction cookware
Cooking zone
Minimum (mm)
1,2 (180*180mm)
120
Flex zone
240 or 160*270
3
(280mm)
180
The above may vary according to the quality of the pan used.
Using your Induction Hob
To start cooking
1.
Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays show
“ – “ or “ – – “, indicating that the induction hob has entered
the state of standby mode.
2.
Place a suitable pan on the cooking zone that
you wish to use.
•
Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
3.
Touching the heating zone selection control, and
a indicator next to the key will flash.
4.
Select one heating zone and set a power level by touching the slider, or slide
along the “—”control, or just touch any point of the “—”.,
