Candy CSE H8A2LE, Руководство пользователя, Страница: 17 / 28

EN
17
l
Rotating the programme selector in both
directions it's possible to select the
desired drying programme.
l
To cancel the selections or switch off the
appliance rotate the programme selector
on
OFF (remember to unplug the
appliance).
l
Press the START/PAUSE button to start
the programme set with the programme
knob (the corresponding indicator light
will light up).
l
Moreover, if you want to modify the
chosen programme, press the desired
options buttons and then press
START/
PAUSE button to start the cycle.
l
After switching on the appliance, wait a
few seconds for the programme to start
running.
PROGRAMME DURATION
l
When a programme is selected the
appliance calculates the time to the end
of the selected programme based upon a
standard loading but, during the cycle, the
appliance corrects the time to the
humidity level of the load.
PROGRAMME END
l
The "END" indicator light will light up at
the end of the programme, it is now
possible to open the door.
l
At the end of the cycle, turn off the
appliance by turning the programme
selector to the
OFF position.
PAUSING THE MACHINE
l
Press the START/PAUSE button (the
corresponding indicator light will flash,
showing that the machine is paused).
l
Press the START/PAUSE button again to
re-start the programme from the point it
had been paused at.
CANCELLING THE SET PROGRAMME
l
To cancel the programme, turn the
programme selector to the
OFF position.
If there is a break in the power supply
whilst the machine is operating, when
the power is restored, by pressing the
START/PAUSE button, the machine will
restart from the beginning of the phase it
was in when the power was lost.
l
Appliance start time can be set with this
button, delaying the start by
3 , 6 or 9
hours.
WARNING
Don’t touch the buttons while inserting
the plug because the machines
calibrates the systems during the first
seconds: touching the buttons, the
machine couldn’t work property. In
this case, remove the plug and repeat
the operation.
PROGRAMME SELECTOR with
OFF position
START/PAUSE button
Close the porthole BEFORE pressing
the START/PAUSE button.
Only the options compatible with the
set programme can be selected.
The programme selector must
ALWAYS be put in the OFF position at
the end of the drying cycle before a
new one can be selected.
DELAY START button