10. Pre-set Function
1) Set the clock first. (Consult the instruction of clock setting.)
2) Input the cooking program. Two stages can be set at most. Defrosting
Note: 1) Clock must be set first. Otherwise,pre-set function will not work.
2) If the pre-set program has been set without the cooking program,
the whole setting will be used as an alarm clock. That means when
pre-set time arrives, buzzer will sound five times only.
11. Inquiring Function
(1) In cooking state, press "
", the current microwave power
will be displayed for 3 seconds.
(2) In pre-set state, press "
" to inquire the time for delay start cooking.
The pre-set time will flash for 3 seconds, then the oven will turn back to the clock display.
(3) During cooking state, press "
" to check the current time. It will be displayed
for 3 seconds.
12. Lock-out Function for Children
Lock: In waiting state, press "
" for 3 seconds, there will be a long "beep" denoting
entering into the children-lock state and LED will display " " and "
" will light.
Lock quitting: In locked state, press "
" for 3 seconds, there will be a long "beep"
denoting that the lock is released, and LED will turn back to the clock stae, "
" will go out.
5) Press "
", the minute figures will flash.
6) Turn " " to adjust the minute figures, the input time should
be within 0--59.
4) Turn " " to adjust the hour figures, the input time should be within
0--23.
3) Press "
". The current clock is displayed. The hour figure flash;
7) Press "
" to finish setting. ":" will light, buzzer will
ring twice when the time arrives, then cooking will start automatically.
should not be set here.
GB
12
