only.
technicians
The cable must be checked regularly and replaced by authorised
•
compressed.
The cable must not be bent or
•
regulations.
and that it is compliant with safety
installer must ensure that the correct electrical connection has been made
The
•
contacts.
breaker must be installed with a minimum opening of 3mm between
-
circuit
If the appliance is being connected directly to the mains an omnipolar
•
pole circuit breaker. The method of connection is shown below.
-
or a single
• If the cable is damaged or to be replaced, the operation must be carried out the
by after-sale agent with dedicated tools to avoid any accidents.
The power supply should be connected in compliance with the relevant standard,
electrician.
must only be made by a qualified
alterations. Any alterations
Check with an electrician whether the domestic wiring system is suitable without
temperature will not exceed 75˚C at any point.
The power supply cable must not touch any hot parts and must be positioned so that its
fire.
devices, as they can cause overheating and
branching
or
reducers,
adapters,
use
not
do
supply,
power
mains
the
to
hob
the
connect
To
the power supply cable sections can withstand the load specified on the rating plate.
3.
plate
value given in the rating
the voltage corresponds to the
2.
hob.
the domestic wiring system is suitable for the power drawn by the
1.
that:
Before connecting the hob to the mains power supply, check
person.
qualified
suitably
a
by
only
supply
power
mains
the
to
connected
be
must
hob
This
Connecting the hob to the mains power supply
28
-
EN
EN-27
•
the isolating switch is easily accessible by the customer
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not
apply force onto the controls protruding from the hob.
Adjusting the bracket position
Fix the hob on the work surface by screw 4 brackets on the bottom case of hob
(see picture) after installation.
A
B
C
D
Screw
Bracket
Screw hole
Bottom case
Cautions
1.
The induction hotplate must be installed by qualified personnel or technicians.
We have professionals at your service. Please never conduct the operation by
yourself.
2.
The hob will not be installed directly above a dishwasher, fridge, freezer,
washing machine or clothes dryer, as the humidity may damage the hob
electronics
3.The induction hotplate shall be installed such that better heat radiation can be
ensured to enhance its reliability.
4.
The wall and induced heating zone above the table surface shall withstand heat.
5.
To avoid any damage, the sandwich layer and adhesive must be resistant to
heat.
Содержание CIFS85MCTT/1
Страница 2: ......
