Candy CFT62/3X Series, Инструкция по эксплуатации

Страница: 7 / 57

6
Method B See Pic 3:
1. Drill 4 holes of Ø 6mm at the bottom of the hanging cupboard.
2. Put the outlet on the air outlet of cooker hood, then install the cooker hood on the
bottom of the cupboard, tighten the cooker hood with enclosed 4 screws.
3. Install the adjusted board on the bottom of the hood in order to keep out the gap
between hood back and cupboard.
Air ventilation setting
Outdoor air ventilation: Turn the adjuster to outdoor position(pic.4A), install the outlet,
turn on the cooker hood, then the air will be vented from the outside outlet.
Indoor air ventilation: Turn the adjuster to indoor position (pic.4B), install the outlet
cover, turn on the cooker hood, then the air can be vented from the inside outlet.

Electrical Installation
All installation must be carried out by a competent person or qualified electrician.
Before connecting the mains supply ensure that the mains voltage corresponds to the
voltage on the rating plate.
Direct Connection
The appliance must be connected directly to the mains using an omnipolar circuit
breaker with a minimum opening of 3mm between the contacts.
The installer must ensure that the correct electrical connection has been made and
that it complies with the wiring diagram.
The cable must not be bent or compressed.