Candy CFQQ5T817EPS, Руководство пользователя

Страница: 27 / 212

GB
Installation
Notice:
For a free standing appliance: this refrigerating appliance is not intended to be used as
a built-in appliance
Problem Possible Cause Possible Solution
The appliance
makes abnormal
sounds.
• The appliance is not located on
level ground.
• The appliance touches some ob -
ject around it.
• Adjust the feet to level the ap -
pliance.
• Remove objects around the ap -
pliance.
A slight sound is to
be heard similar to
that of flowing wa -
ter.
• - • This is normal.
You will hear an
alarm beep.
• The fridge storage compartment
door is open.
• Close the door.
You will hear a faint
hum.
• The anti-condensation system is
working
• This prevents condensation
and is normal
The interior lighting
or cooling system
does not work.
• Mains plug is not connected in the
mains socket.
• The power supply is not intact.
• The LED-lamp is out of order.
• Connect the mains plug.
• Check the electrical supply to
the room. Call the local electric -
ity company!
• Please call the service for
changing the lamp.
Unpacking
▶
Take the appliance out of the packaging.
▶
Remove all packaging materials.
Environmental conditions
The room temperature should always be between 10° C and 43° C, since it can influence
the temperature inside the appliance and its energy consumption. Do not install the appli -
ance near other heat-emitting appliances (ovens, refrigerators) without isolation.
Space requirement
Required space when door is opened:
W1=1325 mm
D1=570 mm
D2=1004 mm
D3=956mm
D3
W1
WARNING!
▶
The appliance is heavy. Always handle with at least two persons.
▶
Keep all packaging materials out of children´s reach and dispose them in an environ -
mentally friendly manner.
Ventilaton cross-section
To achieve sufficient ventilation of the appliance for
safety reasons, the information of the required venti -
lation cross sections must be observed.
A igning the appliance
The appliance should be placed on a flat and solid sur -
face.
1. Tilt the refrigerator slightly backwards.
2. Set the feet to the desired level.
Make sure the distance to the wall on the hinge side is
at least 10 cm for the door to open properly.
1. 2.
27