Candy CDIH 1D952, Руководство пользователя

Страница: 14 / 51

12
Installation instructions
Slide toe kick firmly into
the spaces on either side
of the chasis to attach.
Fix brackets to panel using Ø3.5 x 13mm
screws. Insert toekick into product and
mark the desired alignment depth on
the bracket. Remove panel. Using a
screwdriver, bend the marked tabs out
on both brackets to prevent toekick from
receding into product further.
153
65
30
100
A
toekick depth range
4
Mark out the pilot hole locations for each
bracket. To establish the height in which
the bracket will be fixed, measure the
distance from the floor to the lowest hole
of the bracket. Remove bracket from the
product and plot the location of the other
holes relative to this measurement. Note
door overhang and swing range.
1
2
Toe kick installation
A
180.9 Centre
3
6
Separate panel