Candy CDG6CBG, Инструкция по эксплуатации

Страница: 7 / 79

7
3. After decide the cooker hood height, measure the position of the holes for hanging
hood,inside chimney bracket ,outside chimney bracket and safety holes. Drill 8 φ 8
holes and insert wall plugs into the holes. Fix the inside chimney bracket on the
wall with 2pcs ST4 x 40mm screws.Screw 2pcs ST4 x 8mm screws in the hole for
hanging the hood body and the screws installed should leave for 3-5mm out of the
wall to hang the hood.The fixed position of the inside chimney bracket is the
highest place of chimney. See pic 2.
4. Install the v-flap(
not included
) and expansion pipe(
not included
) onto the cooker
hood. Fix the expansion pipe on the outlet with a cable tie. Please note: The
expansion pipe and v-flap are not included in the product. See Pic 3.
5. Hang the cooker hood onto the hook.See pic 4.