.16.
o You should be careful to make sure that wine bottles do not touch the
rear wall of the appliance, as this can interrupt the automatic defrosting
process and deflect water into the base of your Wine Cooler.
Moving Your Wine Cooler
If you need to move your Wine Cooler to another location you should
follow the steps outlined below.
o Remove all items from the Wine Cooler.
o Securely tape down all loose items such as the shelves inside of the
appliance.
o Turn the adjustable foot up to the base to avoid damage.
o Tape the door closed.
o Ensure the appliance stays secure in the upright position during
transportation. Also protect the outside of the appliance with a blanket
or similar item.
Power Failure
o If power is cut to the appliance, for a few hours it will be able to maintain
the temperature inside the cabinet. Providing that the number of times
that the door is opened is kept to a minimum.
o If the power cut is for longer than a few hours, then you will need to store
the contents in an alternate location to prevent them being affected by
temperature rise.
IMPORTANT: If the appliance is unplugged, the power is lost or turned off
you must wait 5 minutes before restarting the Wine Cooler. If you attempt to
restart before this time delay, the compressor could be damaged.
Vacation Time
Short vacations:
Leave the Wine Cooler in operation for holidays of less
than 3 weeks.
Long vacations:
o If your appliance is not going to be in use for a period of time, you should
remove the bottles of wine and switch off the appliance
o The interior should be cleaned with a solution of bicarbonate of soda
and lukewarm water.
o The interior should then be thoroughly dried.
o To prevent mould growth, the door should be left slightly ajar.
Disconnecting From Power
o If the unit is unplugged, or there is a power cut, you must wait for 5
minutes before restarting. Attempting to restart the Wine Cooler before 5
minutes has elapsed, may cause it not to function.
