Candy BMW 148PH3/1-19 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 24

Candy BMW 148PH3/1-19 Скачать руководство пользователя страница 13

EN

13

l

To turn the appliance on and off, press
the

ON/OFF

button.

Language setting

l

After connecting the machine to the
network and turning it on, turn the

"SMART RING"

to display the available

languages.

l

Select the desired language by turning
the

"SMART RING"

and confirm by

pressing

"SET"

. From now on, you can

select and start programs.

Change the language

If you want to change the setting language
you will have to hold the

"SET"

button

down for

5 seconds

. The welcome

message will appear on the display, and by
turning the

"SMART RING"

you will be able

to choose a new language.

l

After turning the appliance on, rotating
the

"SMART RING"

the icons for the

programmes will light up and the display
will show the description and the relevant
parameters.

l

To start the selected cycle with the preset
parameters, press

START/PAUSE

.

l

If the selected programme is to be
modified, press

"SET"

and rotate the

"SMART RING"

next to the icon of the

selected option; then, press

"SET"

again.

l

Rotating the

"SMART RING"

you can

display the available selections for the

set option. To confirm press

"SET"

, then

press

START/PAUSE

to start the cycle or

repeat the operation for other options.

l

Press to start the set cycle.

WARNING:

Do  not  touch  the  display  while  fitting  the
plug, because during the initial seconds,
the machine performs a self-calibration
that  might  be  interrupted:  if  this
occurs,  the  machine  may  not  operate
properly. In this case, remove the plug
and repeat the operation.

ON/OFF button

At  the  end  of  the  cycle,  do  not  forget
to  turn  off  the  appliance  by  the
ON/OFF  button,  disconnect  the  plug
and close the water faucet.

First starting

Through this process all saved
settings will be cancelled.

SMART RING (ring for selecting
PROGRAMMES/OPTIONS)

When the appliance is turned on again,
the last programme will be shown,
memorising the previously set values.

Only the options compatible with the
set programme can be selected.

To cancel the program selection, turn
the "SMART RING" to the program
area and press "SET".

When  the  programme  is  running,  the
display  will  show  the  time  to  elapse.
Rotating  the  "SMART  RING"  all
information  about  the  cycle  will  be
displayed.

START/PAUSE button

Close the porthole BEFORE pressing
the START/PAUSE button.

«
...
11
12
13
14
15
...
»

Содержание BMW 148PH3/1-19

























Отзывы:

Нет отзывов