CANDY HOOVER ROSIERES, Руководство пользователя

Страница: 27 / 44

27
•
Turn the levelling screws up to the base to
avoid damage.
•
Tape the doors shut.
•
Be sure the wine cooler stays in the upright
position during transportation.
TROUBLESHOOTING
You can solve many common wine cooler
problems easily, saving you the cost of a
possible service call. Try the suggestions below
to see if you can solve the problem before
calling the servicer.
PROBLEM POSSIBLE CAUSE
Wine cooler does
not operate. Not plugged in.
The circuit breaker
tripped or blown
fuse.
Wine cooler is
not cold enough. Check to be sure
the
temperature
control setting.
External
environment may
require a higher
setting.
The door is opened
too often.
The door is not
closed completely.
The door gasket
does
not seal
properly.
The wine cooler
does not have the
correct clearances.
Compressor turns
on
and off
frequently
The room
temperature is
hotter than normal.
A large amount of
contents has been
added to the wine
cooler.
The door is opened
too often.
The door is not
closed completely.
The
temperature
control is not set
correctly.
The door gasket
does
not seal
properly.
The wine cooler
does not have the
correct clearances.
The light does not
work. The home circuit
breaker or fuse has
tripped.
The wine cooler is
unplugged.
The
bulb has
burned out.
The switch is in the
"OFF" position.
Vibrations. Check to assure
that
the wine
cooler is level.
The wine cooler
seems to make
too much noise. The rattling noise
may come from the
flow of the
refrigerant,which is
normal.
As each cycle ends,
you
may hear
gurgling sounds
caused by the flow
of refrigerant in
your wine cooler.
Contraction
and
expansion of the
inside walls may
cause popping and
crackling noises.
The wine cooler is
not level.
The door will not
close properly. The wine cooler is
not level.
The doors were
reversed and not
properly installed.
The gasket is dirty.
The shelves are out
of position.
Technical specifications:
For detailed specifications, please refer to the
nameplate at the back of the wine cellar. The
specifications are subject to change without
prior notice due to products improvement.