Step 3 - Fold, loosen and assemble the
bottom Flaps
The bottom of the case is designed
so the larger panels fit on the outside of the
shorter panels—see figures 6 and 7
Figure 6
Showing the longer
bottom panels
(holes are at outer edge)
Figure 7
Showing the shorter bottom panels
(holes are at inner Folding edge)
Fold and unfold all of these panels repeatedly to make the material
easier to work with.
Insert (2) screw posts (the ones with the holes) into the holes at the bottom of
each of the shorter panels (figure 7) The flat end of the screw post will face
the inside of the case (figure 8)
Figure 8 - viewing box from inside
